How to remove kitchen kickboards

There's a leak under the kitchen units and I need the kickboards off to see it. Do they clip out or are they screwed in?

Asked by Greg on 16th Aug 2026
Expert Trade Answers
"They should be clipped on,so just try to pull gently the top edge towards you"
Answered on 16th Aug 2026 - Member since Oct 2020 - report
"They should just clip in, so find an edge and pull. Depending on age of clips they might break off but cheap enough on Amazon. Might want to look for screw holes on edge of cupboard about 60mm inwards from door edge. Just in case but general rule of thumb they should just be clipped"
Answered on 16th Aug 2026 - Member since Jan 2026 - report
"Yes clips
The best thing to do is use an Allen key and a pair of pliers. Insert the Allen key, turn it to the six o’clock position, then grip it with the pliers and pull. This should release it and allow you to carefully pull the kickboard plinth off"
Answered on 16th Aug 2026 - Member since Mar 2026 - report
"Depends if units have full height sides proberbly screwed, if units are on legs they shoul pull of"
Answered on 17th Aug 2026 - Member since Mar 2026 - report
"Hi Grag, kickboards are clicked in to the legs of the units. A good pull usually works. In some instances they can be more tricky and handy trick is to apply some frog tape to the face of the kickboard with the tape overlapping each piece of tape with roughly 6 inches by 4 inches of tape applied. Then use mitre glue and setting spray to glue a small piece of timber to the tape you have applied this will allow you something to pull on to release them from the clips. Hope this helps"
Answered on 17th Aug 2026 - Member since Aug 2026 - report
"They are normally clipped in which should allow them to be removed and refitted very easily"
Answered on 18th Aug 2026 - Member since Feb 2026 - report
"Easy the kitchen plinth should have 5 /10 mm gap at the top and you just need to put pressure and pull
This should come easy also check YouTube"
Answered on 19th Aug 2026 - Member since Jan 2026 - report
"Most modern kitchen kickboards, also called plinths, are held onto the cabinet legs by plastic clips rather than screws. Start at one end and gently pull the top edge forward, working gradually along its length. A suction cup or a carefully used hooked tool can help, but avoid levering against the cabinet or flooring because the board can chip.

Check first for screws, silicone, corner trims or end panels holding it in place. Dishwasher plinths and older fitted kitchens may use different fixings. As there is a leak, turn off the relevant water supply first, and isolate the electricity if water is close to sockets, appliances or wiring."
Answered on 19th Aug 2026 - Member since Aug 2026 - report
Find Tradespeople, compare up to 3 quotes!
It's FREE and there are no obligations
Ask a Trade
Got a question that only a tradesperson can answer? We have thousands of trades ready to answer any question you may have.
Ask your question
Ask a Trade

Are you looking for advice on a DIY project or have a question for our tradespeople?

We'll email your question to tradespeople who are skilled in your chosen category.

Your question will be made public - please do not include any personal details.

{{ first(ask.errors)[0] }}

By continuing you agree to the Community Guidelines.

Report Content

{{ first(reportForm.errors) }}

Thank you

Your report has been created and will be investigated shortly.

Ready to get a price for your home improvement project?
Get started

Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year